Current Product Line

	Application / Surge Protection Device required for  Contact Email  or Contact Phone
All Product Brochures/shortforms are in Adobe Acrobat Reader format.

If you require further information on any of our products please contact the factory or one of our distributors.

The Zymax ZM AC power-line surge protector range features our patented MMOV technology, to find out more click here.

ZMOV AC Power Shunt Protector

High specification 420 Joule mains shunt barrier utilizing Zymax's patented MMOV technology. DIN rail top-hat mounting, can be installed within a consumer unit or supplied in an IP55/IP65 enclosure, fused and ready to install. Also will self-check connections for live-neutral swap and earth integrity.

Available in either 230V or 110V versions.

ZM06 6A AC Power Protector & Filter

420 Joule surge suppression with high specification 6A RFI filtering. Utilizing Zymax's patented MMOV technology giving visual and audible status indication. Can be supplied in IP55/IP65 enclosure with a fused isolator, ready for easy installation. Product will also check connecting wiring for live-neutral swap and earth integrity. More thorough aging information can be obtained using our ZMR reader.

Available in either 230V or 110V versions.

ZM20 20A AC Power Protector & Filter

420 Joule surge suppression with high specification 20A RFI filtering. Utilizing Zymax's patented MMOV technology giving visual and audible status indication. Product will also check connecting wiring for live-neutral swap and earth integrity. More thorough aging information can be obtained using our ZMR reader.

Available in either 230V or 110V versions.

ZM3000 Hi-Energy 3-Phase AC Power Protector

High energy 1000 Joule protector for Category C applications. Ideal for fitting at mains power entry point. DIN rail protection modules incorporating our advanced MMOV monitoring technology. Providing a truly 'fit and forget' solution for major spike elimination. Supplied in IP55 enclosure with fuses. The 3 Replaceable ZM1000 modules can be mounted without the enclosure onto standard top hat DIN rail if desired.

ZMR MMOV® reader

Simply press and point to read status data from any Zymax ZM AC Power-line protection device. Information data includes product ID, firmware version, date of manufacture, Actual MOV aging level (allowing for preventative maintenance) and surges counted (on appropriate devices). No physical contact with the device under test is required.

ZD Data Protector

Zymax's range of low cost ZD data protectors. Standard DIN top-hat rail mounting. Available with clamping voltages of 6, 16, 33, 51, 75, 100 and 200v (ideal for PSTN lines).

order codes ZD06, ZD16, ZD33, ZD51, ZD75, ZD100 & ZD200

ATEX CERTIFIED VERSIONS NOW AVAILABLE! ZD06EXN, ZD16EXN, ZD33EXN, ZD51EXN & ZD75EXN

ZW Wide bandwidth Data Protector

The ZW range are high speed, low capacitance data protectors suitable for networks such as Profibus.

Available to clamp at 6, 16, 33, 51 & 75 volts.

order codes ZW06, ZW16, ZW33, ZW51 & ZW75

(Now also available with 400V clamping for Milltronics EnviroRanger, HydroRanger and HydroRanger plus networks) order code ZW400.

ATEX CERTIFIED VERSIONS NOW AVAILABLE! ZW06EXN, ZW16EXN, ZW33EXN, ZW51EXN & ZW75EXN

High energy 4 wire protection (6 wires connected). Incorporates two UK BT631 line sockets for easy connection. Push the button on the top panel and the LED will indicate the state of protection and the line. Supplied with a 1M line cord. Standard top hat DIN rail mounting.

Surge protector for video and CCTV applications.
BNC 75ohm connection.

ZA Aerial Protector

High energy coax protection. Available to clamp at 90V (ZA90) and 350V (ZA350) with BNC, N Type or TNC connections (50 or 75 ohm impedance). Nickel plated precision made body ensures low attenuation of signals up to several GHz. A range of mounting options is also available for this device, please contact the factory for more information.

ZP AC/DC Low voltage Power Supply Protector

Shunt overvoltage protector with filtering, ideal for 24v power supplies (ZP28). Virtually zero line resistance. Clean output can be daisy chained.

Series filter is limited to 10A, or the device can be wired in parallel with the supply to provide surge protection with unlimited current.

Also available ZP18 (for 12V supplies) & ZP38.

Please specify AC or DC requirement when ordering.

ZT Field Transmitter Protector

Shunt barrier for direct connection to field mounted equipment. Stainless steel enclosure. Available in 2, 3 and 4 wire versions with 1/2" NPT, G(BSP) 1/2" and 20mm ISO thread options.

IPU40 LOAD CELL Protector

Surge protection solution for load cells. Supplied in an IP67 wall mounting enclosure with wire entry glands and M8 external earth connection.

Home | Company | Products | ZIPS | ZAPS | General info | Links | Sales | Distributors